This Cetus has a variable inlet height using the unique patented Pondflow regulation system or use when gravity fed. This allows water levels within the pond to drop without causing the circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurized filter.

If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter.

It is advised that all pressurized filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids.

• Can be gravity or pump fed
• Perfect fit screen so no waste can bypass
• Totally reliable and simple to install
• Plug and Play comes with flexible boots to connect to pipe work
• Greatly reduced backwashing / maintenance of pressurised filters
• Robust one piece mould no welded joints  no leaks!
• Large waste collection area which slopes to sump outlet
• Ideal for mechanically filtering skimmer lines
• Patented float that gives constant flow for gravity-fed level fluctuations
• Maximum flow rate 18,000 litres per hour
• Tri-slot 300 micron wedge wire screen in 316L stainless steel on 100% of surface area
• Increased levels of oxygen

Technical Information

Max Flow:	4,000 gallons/hr
Inlet:	Gravity-fed 4 inch, Pump-fed 2 inch
Outlet:	Gravity-fed 1.5 inch, Pump-fed 4 inch
Outlet Waste:	3 inch
Height:	37.2 inches
Length:	33.5 inches
Width:	22.4 inches
Screen:	300 micron